Hello Uthgard players,

I decided to revive my forum signature script from Uthgard 1. At that time, it was restricted only to my guild and ally - but now I wanted it to be useable by everyone. Just minutes after I started editing the old graphics file, my dear wife saw what I was doing and couldn't hold out watching my "graphic-designer-performance" ... end of the story: One week later she had created an almost completly redone graphic! See in my signature how it looks like - couldn't have done it better myself!

So what are the features?
+ You can display up to 6 of your toons in one picture, the guild emblem from the 1st char is placed
+ It shows the sum of total and lwrps of your chars
+ Chars that have lwrp are highlighted with a fireball
+ Color of the middle lighning changes depending on the amount of lwrp in daoc color-style (gray, green, blue...)
+ It shows the lvl of your chars until 50, then the RR.
+ For lvl 50, it displays how much rps you'll need to RR-up, if its not more than 99k.
+ The file is cached, means it's saved somewhere and only created fresh if the saved file is older than 5min.

How to use it?
In your browser, open a new tab and copy this into the adress bar:

Code: Select all

https://uthsig.000webhostapp.com/uthsig.php?char1+char2+char3

Replace char1, char2.. etc with your charnames. So you see, after the "?" just list up to 6 charnames separated by "+". After pressing enter you should see your personal graphic. You can copy the link and use it e.g. in this forums control panel as your signature pic.

If you encounter any errors, just send me a PM.
The font for total rp and lwrp fields might be changed later, I am not 100% satisfied with it at the moment.
All rights of the DAoC graphic and knot are with the original author.

That's it, I hope you like it and use it a lot =)

Update 09.09.2018
I also have single line signatures, that you might use for your additional chars in a second graphic if you want to show more than 6 toons in total. I made it in 4 different colors:

Code: Select all

brown: https://uthsig.000webhostapp.com/sig.php?char1+char2
red: https://uthsig.000webhostapp.com/sig_alb.php?char1+char2
blue: https://uthsig.000webhostapp.com/sig_mid.php?char1+char2
green: https://uthsig.000webhostapp.com/sig_hib.php?char1+char2

Regards,
Rector

Nice one Rector..

Edit: Tested it, and works fine.. glad your back and active!

I'd just aswell put it to use..

Thanks for that awsome Work.

Nice one thanks

thx, looks nice... ouh I am close to level 71? Or what does the number right next to my RR mean?

For me it looks like the percentage to the next up.

I can't use the multi line one, it fails. Single-line works fine though...

Single lines:





Multi-lines:

Thanks for your replies, nice to see this all

@Holsten: Its the amount of k-rps you'll need for the next RR-up. If the RR/rp-table didnt change from Uth1 to Uth2, it still should be correct. These are the numbers that are used: https://pastebin.com/ZaNbZ7z2 (Thx@forum moderation for fixing my broken post =) )

@kinthos: I'll try to find out what goes wrong...
Edit: I found and fixed the error, it was caused by the blank in your guildname. Now it's working
PS: You have too much chars

Looks good

Rector wrote:@kinthos: I'll try to find out what goes wrong...
Edit: I found and fixed the error, it was caused by the blank in your guildname. Now it's working
PS: You have too much chars

Thanks for the fix. I know right ;]

Thumbs up for this work!

As I was asked how this is done, here is the code of the small single line signature:
https://pastebin.com/EtGQexUk
This should be enough to create your own thing, if you really want to

It works on the free webspace e.g. from https://de.000webhost.com

This is nice. Good job.

Font update for lwrp and total rp numbers.

@Moderators: Can you please delete my 2 broken posts from page 1? Thx!

Bump - plz repair my buggy post from page 1 (delete the 2 posts with the [code])
And how about sticky?