Hi,
To sell items at our consignement merchant, there is a command /setprice.
the arguments are: /setprice <slot> <money>
But this is illogic and not "user friendly" at all.
Suppose you need to sell 20 items at the same price, say 15 gold 50 silver. on the 3rd page of your merchant.
The first slot of the 3rd page is 3 x 20 = 60, so to set the price of the first item you have to enter:
/setprice 60 155000.
For the second item you use Shift + Up Arrow to recall the command you previously entrer.
The problem is here: what you need to change? The slot only. And you have to press multiples Shift + Left Arrow to bring the cursor to the 0 and change the 60 to 61.
What Im asking, is that the order of the parameters of this commend are inverted: /setprice <money> <slot> since the slot will be changed more often than the price.
This command is usable only at the consignement merchant, so it should not be used a lot of time in the code, so this change should be very easy to implement.

Thanks to take a look at this !

simply do it like on live too..

/macro PRICE /setprice 60 155000

switch the slot from 1 to one without price, and press your macro again. easier then scrolling the chat

wow didnt know about this command tyty
ok thought you could set the price of 60items at once with that macro. doesnt seem like (

Samirane wrote:simply do it like on live too..

/macro PRICE /setprice 60 155000

switch the slot from 1 to one without price, and press your macro again. easier then scrolling the chat

You did not understand: i need to set price for several items in the same page. Your macro works to set the price of item in slot 60, but not for items in slots 61, 62.. and so until, say, slot 74 if i have 15 items at the same price.
I dont know any way to automatically increment the "60" in that amcro.

Another way to solve the problem for DEV, but harder to programm, it is to put a button "keep price" on the little window used to set the price (as the "keep Qty" button on other merchants window), and use this price for all following items placed in the other slots until we change the price.

yes..

but i am alchimist.. i need to set a full page of the CM with the same price..

so i write the macro with the first slot. Then i put all items in cm without price.
press my macro
switch the first slot with the last and press macro again.

switch the first slot with the one before last.. press macro - and so on untill i am done

When i am on another item with a different price i write a new macro

Hi Samirane,
I finally understood what you wrote
Thanks for this tip, it speeds up the process of putting the prices

Wakanidoo wrote:Hi Samirane,
I finally understood what you wrote
Thanks for this tip, it speeds up the process of putting the prices

sry sometimes my english is slacking^^
but glad i could help you out